Crawl Space, Attic & Floor Support in Cramerton, NC

Up to half of the air you breathe upstairs starts in the crawl space. When that space is damp and vented to the outside, your HVAC fights humidity all summer and cold air all winter — driving up bills and inviting mold, musty odors, and wood rot. Encapsulation seals the space off for good.

• Full clean-out and removal of old, contaminated insulation and debris
• Heavy-duty reinforced vapor barrier draped across the floor and walls
• Sealing of vents, rim joists, and penetrations to stop outside air
• Drainage and sump solutions where standing water is present
• Energy-efficient dehumidifier sized to keep humidity in check
• Optional crawl space insulation for year-round comfort

Your attic is the single biggest place a home loses energy. Old, flattened, or contaminated insulation — plus the hidden air leaks beneath it — let conditioned air escape and pull dust, allergens, and outside air back in. Attic restoration fixes the whole system, not just the symptoms.

• Safe removal and disposal of old, damaged, or contaminated insulation
• Decontamination and sanitizing after rodent or moisture issues
• Air sealing of top plates, penetrations, and the attic hatch
• New blown-in or batt insulation to the recommended R-value
• Proper ventilation and baffles to protect the roof deck
• Optional radiant barrier to cut summer heat gain

Bouncy, sloping, or sagging floors usually trace back to the crawl space — failing support posts, sagging beams, or joists weakened by years of moisture. We stabilize and lift from below with engineered steel supports so your floors are solid and level again.

• Free structural assessment of the crawl space and floor system
• Adjustable engineered steel support jacks on solid footings
• Sister-joist and beam reinforcement or replacement where needed
• Gradual, controlled lift to bring floors back toward level
• Repair of moisture-damaged wood to prevent it recurring
• Pairs naturally with encapsulation to stop the moisture at the source

Blown-in (loose-fill) insulation flows into every gap, seam, and hard-to-reach corner that batts leave exposed, building a deep, continuous blanket across your attic floor. It's one of the quickest, highest-return ways to cut heat loss and keep upstairs rooms comfortable year-round.

• Assessment of your current insulation depth and R-value
• Air sealing of leaks first, so the new insulation performs
• Blown-in insulation installed evenly to the recommended R-value
• Full coverage into corners, edges, and around obstructions
• Clean, contained installation with tidy cleanup afterward

Batt (and roll) insulation is the right tool for walls, band joists, crawl space floors, and open framing, where each cavity can be measured and filled by hand. Cut and fitted properly — with no gaps or compression — batts deliver a consistent thermal barrier in the places loose-fill can't reach.

• Right-sized batts matched to each cavity's depth and width
• Careful fitting with no gaps, compression, or voids
• Band-joist and rim insulation to seal the perimeter
• Correct faced or unfaced batts and vapor orientation
• Wall, floor, crawl space, and bonus-room applications

Old insulation that's been soaked, compacted, or contaminated by rodents doesn't just stop working — it holds odors, allergens, and droppings right above your living space. We remove and haul it away cleanly with commercial vacuums and containment, so your attic or crawl space starts fresh.

• Commercial-vacuum removal of loose-fill insulation
• Bagging and haul-away of old batts and debris
• Containment to keep dust out of your living space
• Sanitizing and deodorizing after rodent or moisture issues
• A clean, prepped surface ready for new insulation

Insulation slows heat, but it doesn't stop air. Hidden gaps around top plates, wiring, plumbing, chimneys, and the attic hatch let the air you paid to heat or cool leak straight out — and pull dust and humidity back in. Air sealing closes those paths so your home holds its temperature and your insulation performs as intended.

• A look for the biggest air-leak points in the attic and crawl space
• Sealing top plates, penetrations, and wiring/plumbing gaps
• Fire-rated sealing around chimneys and flues
• Weatherstripping and sealing of the attic hatch
• Sealing rim and band joists down in the crawl space

The bare soil in a crawl space constantly releases moisture into the air, feeding mold, wood rot, and the humidity your HVAC has to fight. A reinforced vapor barrier across the floor and up the walls blocks that moisture at the source. It's the foundation of a healthy crawl space and a natural step toward full encapsulation.

• Clean-out of debris and old, deteriorated liner
• Heavy-duty reinforced vapor barrier across the crawl space floor
• Barrier run up the foundation walls and sealed at the seams
• Sealing around piers, posts, and penetrations
• A clear path to full encapsulation whenever you're ready

If water pools under your home after every rain, no vapor barrier or dehumidifier can keep up. We solve crawl space water at the source with interior drainage, a sump pump, and moisture management, so the space stays dry and everything above it stays protected.

• Assessment of where water is entering and collecting
• Interior perimeter drainage to channel water away
• A sump basin and pump sized to your crawl space
• Vapor barrier and sealing to manage remaining moisture
• Coordination with grading and downspout fixes at the surface